TIPTEL 540 SD - Page 70

Call forwarding
70
Press control button (right) to
change to the next entry location
and enter other digits.
The cursor to the next entry location.
Use the control button (left) to
move the cursor once place back-
wards, for example to overwrite a
character.
The cursor moves to the left.
To transfer a call number from the
t
elephone book, press the selection
button next to the "Insert" symbol.
The call number is entered to the left of
t
he cursor.

Search and select names as des-
cribed under "Search entries", p.35.
To enter a character press second-
ary function and then control button
(down).
An empty space is inserted to the left of
t
he cursor.
To delete a digit, move the cursor to
t
he location and press the selection
button next to the delete symbol.
The character under the cursor is delet-
ed.
2s
To delete the whole entry press the
selection button next to the delete
symbol for 2 seconds.
The entire entry is deleted.
To make further settings press stop. The current setting is confirmed.
To stop the entry press stop several
t
imes.
The initial state is again displayed.

You can also activate call forwarding by remote access (Refer to remote ac-
cess)