30
The status screen shows the following information:
Battery - the battery power left on your TomTom Bandit. Charge the Batt-Stick if the power is
low.
Storage - the amount of free space available on your TomTom Bandit.
Tip: If you are running out of space, connect the Batt-Stick to your computer and transfer
some files.
QuickGPS - the status of the QuickGPSFix information on your TomTom Bandit.
QuickGPSfix helps your TomTom Bandit find your precise location quickly so that you can start
your activity. To automatically update the QuickGPSfix information on your TomTom Bandit,
connect your TomTom Bandit to the Mobile app. QuickGPSfix information is valid for three days
after you download it.
These symbols are used to show the status of QuickGPSFix:
QuickGPSfix on your TomTom Bandit is up to date.
QuickGPSfix on your TomTom Bandit is out of date. If the QuickGPSfix
information on your TomTom Bandit is out of date, your camera still
works as usual. It may, however, take longer to get a GPS fix when
you want to start an activity.
Version - the software version number of your TomTom Bandit. You may need this information
if you contact Customer Support.
Serial number - The serial number of your TomTom Bandit.
Switching your TomTom Bandit on and off
Your TomTom Bandit can be on, off, or in standby. You can only switch the TomTom Bandit on and
off using the buttons on the TomTom Bandit.
Switching on your TomTom Bandit
Press the START button at the back of the TomTom Bandit for 2 seconds to switch your TomTom
Bandit on. The TomTom logo is shown, the red LEDs flash and you hear the start-up sound. If no
microSD card is inserted into the Batt-Stick, you are asked to insert a memory card so that the
TomTom Bandit can switch on.
If the TomTom Bandit is in standby mode, press the control button to wake up the TomTom Bandit.
The TomTom Bandit stays on during the following conditions:
The TomTom Bandit is recording a video or you are taking photos.
To Next Page
Loading...
Need help?
General