TomTom Bandit - Installing the Batt-Stick

60
Inserting the Batt-stick
Important: If you remove the Batt-Stick or lens cover be extra careful not to let dirt or water enter
the TomTom Bandit or the Batt-Stick. Only remove the Batt-Stick or lens cover in clean and dry
conditions.
To insert the Batt-Stick, follow these steps:
1. Insert the Batt-Stick into the camera.
2. Make sure the two dots align and are close together.
Important: If you see only one dot when the Batt-Stick is inserted do not try to turn it. You
must first put the Batt-Stick in the unlocked position before you can insert it correctly.
Installing the Batt-Stick