39
Using the optional remote control
The remote control can be used to start and stop recording and to manually add highlights to your
video. Use the remote control when you can't easily or safely reach your TomTom Bandit.
You can hold the remote control in your hand, or you can attach it to a place you can easily reach.
Note: The remote uses Bluetooth Smart to connect to your TomTom Bandit and can only be used
with one TomTom Bandit at a time.
Connecting the remote control
1. From the Camera Status screen on your TomTom Bandit, move down to open the SETTINGS
menu.
2. Select GENERAL, then move right.
3. Select CONNECT, then move right.
4. Select REMOTE, then move right.
5. Move up or down to turn it on.
6. On the remote control, press the ON button for 3 seconds until the LED flashes green three
times.
The remote control is connected to the TomTom Bandit.
Tip: You can also use the Mobile app live viewfinder as a remote control.
The remote control can only be used with one camera at a time. If you want to connect your remote
control to a different camera, repeat the instructions above with the remote control in range of the
new camera.
Using the remote control to record a video
To wake up the remote control, press the START button (button 2) for 3 seconds until the LED (3)
flashes green three times.
Press the START button (button 2) to start recording. The LED (3) flashes one time.
Press the START button (button 2) to add a highlight to your video.
Press the ON button (button 1) to stop recording. The LED (3) flashes one time.
To Next Page
Loading...
Need help?
General