17
2. Clean the area where you want to install the basic mount.
Wax, oil, dirt and moisture reduce adhesion, which can result in a weak bond. Make sure that
the area is completely dry.
3. Make sure the mount is aligned in the correct direction, then, in dry, room-temperature
conditions, attach the mount. Push the mount firmly down onto the surface.
The mount won't attach securely if you install it in damp and cold conditions.
4. Wait 24 hours for the adhesive to cure.
5. Install the TomTom Bandit on the mount. Make sure the TomTom Bandit is secure.
Important: Make sure your TomTom Bandit is secure before you start every activity. Regularly
check whether the mount is secure. If the activity involves shocks or vibration, use a lanyard
to prevent loss of the TomTom Bandit if the mount fails.
Installing the 360 pitch mount
The 360 pitch mount kit lets you mount your TomTom Bandit on a helmet or other flat or slightly
curved surface. Flat and curved mount bases are supplied. Once installed, you can easily adjust the
direction and angle of your TomTom Bandit.
Tip: Additional mounts are available as accessories.
Tip: To install your TomTom Bandit on handlebars, use the optional bike mount.
To Next Page
Loading...
Need help?
General