vi
WARNING: In some of the illustrations or photos used in this
manual, panels or guards may have been removed for demonstration
purposes. Never operate the vehicle with any panels or guards
removed. If the removal of panels or guards is necessary to make a
repair, these MUST be replaced before operation.
WARNING: Always check that any suspended vehicle attachments
are lowered to the ground before beginning repair or maintenance
work on a vehicle.
WARNING: Vehicle and implement parts can become hot during
operation and may be under pressure. Refer to vehicle manuals.
WARNING: Wear appropriate protective clothing for the task being
undertaken and conditions.
WARNING: Do not operate equipment around explosive equipment
or supplies.
WARNING: Topcon is committed to good environmental
performance and minimizes the use of any potentially harmful
substances in its products. However, it is always advisable not to
handle damaged electronic equipment.
This Topcon product may contain a sealed lithium battery.
Always dispose of any electronic equipment thoughtfully and
responsibly.
Exposure to Radio Frequency
Exposure to energy from radio frequencies is an important safety issue. Keep a
distance of at least 20 cm (7.8 inches) between people and any radiating antenna. Keep
a distance of at least 20 cm between transmitting antennas.
WARNING: Products using cellular modem or an RTK base station
can transmit radio frequency energy. Check with your dealer.
This device is designed to operate with TPA approved antennas. Discuss with your
dealer.
Preparation for Operation
• Read and understand this manual and learn all of the controls before you use the
equipment.
• Keep the manual with the equipment.
• If the equipment is moved to another vehicle, move the manual as well.
To Next Page
Loading...