Topcom YieldTrakk YM-1 - Harvest Current

Chapter 5 – Console Controls
23
5.3.1. Harvest current
1. Press the information area of the mini-view to display the options
available.
• Current wet yield: T/Ha (Bu/Ac) based on the raw yield
data.
• Current dry yield: Calculated T/Ha (Bu/Ac) based on
current wet yield data with respect to the desired moisture
reference point (i.e. after it has dried). The moisture reference
point is set via the YieldTrakk UT interface.
• Current wet productivity: T/Hr (Bu/Hr) Raw yield sensor
data.