24
• Current dry productivity: Calculated T/Hr (Bu/Hr) based
on the current wet productivity with respect to the desired
moisture reference point. The moisture reference point is set
via the YieldTrakk UT interface.
• Current moisture content: Percentage raw moisture sensor
data.
• Wet harvested amount: Raw Total Tonnes (Bu) harvested.
• Dry harvested amount: Calculated Total Tonnes (Bu) based
on the wet harvested amount with respect to the desired
moisture reference point. The moisture reference point is set
via the YieldTrakk UT interface.
• Working width: In metres (inches) measuring how much of
the combine's header is actually harvesting (uses auto-cut-
width from existing coverage to vary this).
• Current cut rate: Ha/Hr (Bu/Hr) based on speed and
working width. Sometimes used as a measurement of
productivity.
2. Deselect and select options as required.
Product configuration
The Product Configuration button displays the Yield window.
This window selects the product being harvested and internally maps
it to the rate channels.
To Next Page
Loading...