36
Icon Description
Forward speed
Switch between current (instantaneous) readout and
average readout for the current job.
Set quantity readouts based on ‘wet’ or ‘dry’ content.
Moisture content
Select, then use and to change the moisture
content.
Crop density
Select, then use and to change the density.
Displayed as kilograms per hectoliter (kg/hl) or pounds per
bushel (lb/B).
Note: Incorrect density is a likely cause of inaccurate
yield results. Check the density regularly.
Adjusting the density does not change existing crop data.
To Next Page
Loading...