7-8
www.topconpa.com
Topcon GPS Manual
stabilizes to within 0.5m of each other.
To set the Base at the current position select4. Set position (Figure
7-11)
Other options include:
Auto Base— This will average positions for 3 minutes and •
set the averaged position into the receiver automatically
Get Position from List— Once a position is locked in using •
Set position, you can name the location and add it to a list
of previously saved positions by selecting Add Position To
List (See “Add Position to List”, page 7-9).
Saved positions can be recalled and reused to ensure the
base coordinates are exactly the same as previously used
at that location (see “Recalling Base Station Position from
List”, page 7-10).
Select 5. Set position (Figure 7-11) to store the current position in
the Hiper-AG’s memory
Please note: When setting the GPS as a Base Station, a position
must be logged into the receiver’s memory.
To Next Page
Loading...
