Topcon CC-100XP - Default Chapter; Table of Contents

Topcon Europe Medical BV Instruction Manual CC-100XP/ CV-5000PC 2/42
Table of contents
1
Setting up the single devices ________________________________________________ 6
2 Setting up the system ______________________________________________________ 6
3 General remarks on operating CV-5000PC to control CC-100XP ________________ 7
4 CV-5000PC Operation window Layout________________________________________ 8
5 Operation in the REFRACTION Tab page ____________________________________ 9
6 Description of the single button functionalities within the REFRACTION Tab page.9
6.1 Selecting a standard Optotype _________________________________________ 9
6.1.1 Two buttons are available to select standard optotypes: ________________________ 9
6.2 Selecting a Visual Acuity (VA) Chart ___________________________________ 10
6.2.1 6 buttons are available to select the desired visual acuity for each selected standard
optotypes (see chapter 1.1) _________________________________________________________ 10
6.3 How to step through the different VA charts? ___________________________ 10
6.3.1 To step through the different VA charts the following buttons can be used: ______ 10
6.4 Selecting other VA tests ______________________________________________ 11
6.4.1 To select ETDRS charts ____________________________________________________ 11
6.4.2 How to toggle between the different ETDRS charts ___________________________ 11
6.4.3 To select Half Clock Fan or Multiple Cross Chart _____________________________ 11
6.4.4 To select the Astigmatism Dot Chart_________________________________________ 11
6.4.5 To select the Monocular Red/Green chart_____________________________________ 12
6.4.6 Other button functionalities ________________________________________________ 12
6.4.7 Masking functions _________________________________________________________ 13
7 Operation in the POLARIZATION Tab page _________________________________ 17
8 Description of the single button functionalities within the POLARIZATION Tab page. 18
8.1 Selecting a standard Polarization test__________________________________ 18
8.1.1 Nineteen buttons are available to select standard Polarization tests: ___________ 18
8.1.2 Inverting the display of the Polarized tests within CC-100XP.__________________ 19
8.1.3 Selecting a Red-Green test _________________________________________________ 22
9 Operation in the CONTRAST Tab page. _____________________________________ 23
10 Description of the single button functionalities within the CONTRAST Tab page. 24
10.1 The Spatial Frequency Contrast Sensitivity Test procedure ______________ 26
10.2 Changing the settings of the Contrast Sensitivity Test___________________ 26
10.3 Changing the settings for the Spatial Frequency Contrast Sensitivity test_27