41
USING THE INSTRUMENT
HOW TO OUTPUT DATA
OUTPUT USING RS232C
This instrument can output data to a PC, etc. via the RS232C interface.
1 Connect the RS232C cable to RS232C OUT.
2 Connect the other end of the cable to the PC., etc.
3 Confirm that set up of data communication settings.
For details, refer to “DATA COMMUNICATION (COMM.)” on page 47.
4 Perform measurements.
5 Tap the PRINT button of the control panel.
Data is outputted to the connected external device.
OUTPUT USING LAN
This instrument can output data to a PC, etc. via the LAN interface.
1 Connect the network cable to LAN OUT.
2 Connect the other end of the cable to the PC., etc.
3 Confirm that set up of LAN connection settings.
For details, refer to “LAN CONNECTION (LAN)” on page 48.
4 Perform measurements.
5 Tap the PRINT button of the control panel.
Data is outputted to the connected external device.
To Next Page
Loading...
