5
GENERAL SAFETY INFORMATION
Preventing Electric Shocks and Fire
To avoid fire and electric shocks, do not place a cup or vessel containing water/fluid on the
instrument.
To avoid electric shocks, do not insert objects through vent holes or gaps or force them
inside the machine body.
To avoid electric shocks, do not attempt disassembling, rebuilding or repairing. For repairs,
call your dealer.
To avoid fire/electric shocks, do not install the instrument in a place where it may get wet.
If there is a malfunction or if the instrument produces smoke, immediately turn OFF the
POWER switch and unplug the power cable. To a avoid a possible fire due to malfunction,
call your dealer and ask for repairs.
Ensuring the Safety of Patients and Operators
To avoid injury by falling, do not install the instrument on a slope or in an unstable place.
Preventing Electric Shocks and Fire
Do not open the cover. For repairs, contact your Topcon dealer.
[The instrument may injure someone by electric shock.]
Electromagnetic Compatibility (EMC)
This instrument has been tested (with 100-240V) and found to comply with IEC60601-1-2:
2001. This instrument radiates radio frequency energy within standard and may affect other
devices in vicinity. If you have found out by turning on/off the instrument that it affects other
devices, it is recommended to change the direction, keep a proper distance against other
devices or change the outlet. If you have a question, consult with the selling agent.
WARNINGS
CAUTIONS
To Next Page
Loading...
Need help?
General
