46
SETTING FUNCTIONS ON SETUP SCREEN
AUTO R/L R/L Measurement of framed lens:
Auto R/L switching
S/R/L
S/R/L Measurement of single lens/framed
lens: Auto R/L switching
OFF S/R/L switching
AUTO MEMORY ON Auto memory is ON when the lens
optical axis is aligned.
S : OFF
R/L : ON
S : OFF R/L : ON Auto memory OFF at measurement of
single lens. It is ON at measurement
of framed lens.
OFF Auto memory OFF.
UV ON UV measurement is ON OFF
OFF UV measurement is OFF
UV STEP 1% STEP UV measurement is ON: Step 1% 1% STEP
5% STEP UV measurement is ON: Step 5%
BEEP ON Buzzer sounds when a measured
value is stored or a button is pushed.
ON
OFF Buzzer OFF
STEP 0.25 0.25-step measurement. 0.25
0.12 0.12-step measurement.
0.01 0.01-step measurement.
A:STEP 5 Rounds axial angle settings to 5°
1
PRISM NO DISPLAY No prism display. X-Y
X-Y Rectangular coordinate display
P-B Polar coordinate display
mm mm display at PD/OFF
CYLINDER MIX Mixed display MIX
+ Plus-fixed display
- Minus-fixed display
To Next Page
Loading...
