1
INTRODUCTION
Thank you for purchasing the TOPCON Laser Photocoagulator
LC-300G.
This instrument should be used for treatment of eye diseases such as
eyeground disease, glaucoma, etc.
This Instruction Manual describes the TOPCON Laser Photocoagulator
LC-300G, including outline, basic operations, troubleshooting, checking,
maintenance and cleaning.
To get the best use of the instrument, read the Safety Displays and Safety
Cautions.
Keep this Manual for future reference.
Laser Photocoagulator LC-300G
Laser Slit Lamp SL-10L G
Slit Lamp Attachment for Laser Photocoagulator SA-1G
[CONTRAINDICATION AND PROHIBITION]
When you emit the laser beam of this instrument to the human organic tissues, the
following symptoms may occur. Always be careful about the purpose position of
the aiming laser. Don't emit the laser beam to others except the treatment position.
Symptom of eyes: Injury in cornea and others or loss of sight
Symptom of skin : Pain or burn
[Human organic tissues may be damaged.]
During operation, let the people around the instrument wear the goggles (applied to
532nm, OD4 or more) suitable for the laser wavelength. Even when you wear the
goggles, do not watch the laser beam directly.
[Your eyes may be injured.]
Use the components specified by TOPCON.
[If you use the instrument wrongly, it may malfunction.]
[WARNING]
When operating the instrument, be careful not to hit the eyes or nose of the patient
by it.
[The patient may be injured.]
[WARNING]
When the arm of the slit lamp attachment for laser photocoagulator is retreated, do
not emit the laser.
[The eyes and skin may be burned or injured by the laser beam.]
To Next Page
Loading...
Need help?
General
