70
OPTIONAL ACCESSORIES
SLIT LAMP ATTACHMENT FOR LASER PHOTOCOAGULATOR SA-1G
Is a slit lamp attachment for laser used by combining with the Laser Photocoagulator LC-300G.
For the specification, refer to "SPECIFICATION OF SLIT LAMP ATTACHMENT FOR LASER PHO-
TOCOAGULATOR SA-1G" on P.65.
STANDARD ACCESSORIES OF SA-1G
Standard accessories of slit lamp attachment are as shown below. Make sure all are in the set:
Name Quantity
Mirror (battledore shape)...............(1)
Accessory mount...........................(1)
Head band.....................................(1)
PROTECT FILTER PF-MZG/PF-MWG, PF-MZG10.6/PF-MWG10.6
Is a special protect filter for use with Laser Photocoagulator LC-300G and is attached to an operation
microscope.
Two mount types, the Zeiss type PF-MZG, PF-MZG10.6 and the Leica type PF-MWG, PF-MWG10.6,
are available.
Choose a type suitable for your microscope.
For the specification, see "SPECIFICATION OF PROTECT FILTER PF-MZG/PF-MWG, PF-MZG10.6/
PF-MWG10.6" on page 65.
STANDARD ACCESSORY OF PF-MZG/PF-MWG, PF-MZG10.6/PF-MWG10.6
Standard accessory of PF-MZG/PF-MWG, PF-MZG10.6/PF-MWG10.6 is as shown below. Make sure
it is in the set:
Name Quantity
Fixing screw ..................................(1)
ENDOPROBE
* When purchasing the endoprobe, ask our sales offices on the back cover of this manual about a
proper one.
FOOTSWITCH FS-HG/FS-LG
Is a footswitch used in combination with the Laser Photocoagulator LC-300G to emit the treatment
laser beam. There are two kinds. One is a footswitch with a high stepping force (FS-HG) and the other
is a one with a low stepping force (FS-LG). Select one of them optionally.
For the specification, see "SPECIFICATION OF FOOTSWITCH FS-HG/FS-LG" on page 66.
To Next Page
Loading...
Need help?
General
