7
WARNING INDICATIONS AND POSITIONS
To secure the safe use of LC-300G, warnings are labeled.
Use the instrument correctly by following these instructions. If any of the following labels are missing,
contact your dealer or TOPCON at the address shown on the back cover.
LASER PHOTOCOAGULATOR LC-300G (MAIN BODY)
Viewed from above
the main body
Viewed from the front of
the main body
Viewed from the back of
the main body
WARNING
Let the people around the instru-
ment wear goggles suitable for the
laser wavelength. The laser beam
may damage their eyes.
NOTES
1. If there is any anomaly, press the Emer-
gency switch and stop the operation immedi-
ately.
2. Do not place inflammables around the
instrument.
3. Do not close up the ventilation hole of the
cover.
4. Do not give shocks to the main body.
5. To the service engineer: Read the work
manual beforehand.
LASER BEAM
Both the beam and diffused beam
are dangerous. Do not look at/
touch these.
Solid laser: (Maximum output) 1.5W
(Wavelength) 532nm
Semi-conductor laser:
(Maximum output) 0.9mW
(Wavelength) 635nm
Class 4 laser product
CAUTION:
The laser beam is
emitted from the
laser beam outlet.
CAUTION
Do not open covers to avoid the
danger of electric shocks. Ask a
service engineer for repairs.
CAUTION
Place the instrument on a
stable place and avoid
injury due to falling.
CAUTION
When the remote interlock is
released, the laser beam is emit-
ted. Both the beam and diffused
beam are dangerous. Do not look
at/touch these.
To Next Page
Loading...
Need help?
General
