EasyManuals Logo

Topcon LC-300G User Manual

Topcon LC-300G
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
5
Icons Prevention item Page
Mandatory Action
For installation, prepare a power supply system satisfying the rating of
AC 100V, 120V, 220V or 240V and a capacity of 550VA and larger.
Use with a voltage other than the displayed voltage may cause injury
by electric shocks and fire.
28
Mandatory Action
For installation, prepare a power supply system allowing protective
grounding, and surely arrange protective grounding. Leaks without
protective grounding may lead to fire and electric shocks.
28
Prohibition
When the remote interlock is released, the laser beam is emitted.
Both the beam and diffused beam are dangerous. Do not look at/
touch these.
29
Prohibition
Do not touch the endoprobe end.
32
Mandatory Action
Install the remote controller in a stable place to prevent injury by falling
off.
33
Prohibition
The laser beam is emitted from the laser beam outlet. Keep your face
off the outlet as the beam may burn your eyes and skin.
34, 38
Mandatory Action
Use this instrument following the procedure described in the Manual.
Controls and/or adjustments by procedures other than those
described here may cause exposure to laser beams and resultant
burns and loss of sight.
34
Prohibition
Place the Footswitch in a position where it is not in the way. To avoid
stumbling/injury to your foot, do not step too deep into the switch.
34, 38,
74
Mandatory Action
Before using, surely adjust the diopter and interpupillary distance.
Incorrect adjustments will lead to improper treatment.
38, 44,
47, 74
Mandatory Action
Before using, surely adjust the focus and position of the aiming beam.
Incorrect adjustments will lead to improper treatment.
38
Mandatory Action
When operating the main unit, watch the space between the moving
parts and protect your fingers.
45
Mandatory Action
When operating the main unit, watch the patient's face and protect the
eyes and nose from the instrument.
45
Prohibition
Set the illumination for a proper brightness. An excessive brightness
will not only bother the patient but may cause damage to the eye.
46
Prohibition
Don't use the test rod for focus adjustment. Focus is not fit when
treatment is done for a patient. Correct treatment is not possible.
48
Prohibition
Do not use chemicals for cleaning, such as caustic cleansers to avoid
exfoliation of nameplates and damage to letters.
57
Mandatory Action
When changing lamp units, shut off the Power switch and pull off the
power cable to avoid electric shocks.
58
CAUTION

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Topcon LC-300G and is the answer not in the manual?

Topcon LC-300G Specifications

General IconGeneral
BrandTopcon
ModelLC-300G
CategoryMedical Equipment
LanguageEnglish

Related product manuals