15
ASSEMBLY PROCEDURE
SECURING THE PATIENT GRIP PG-1(OPTIONAL ACCESSORY)
1 Align the patient grip with a groove on the rear of the chinrest base.
2 Fix the patient grip with screws.
SECURING the Chinrest Base Plate
1 Secure the chinrest base plate to the unit type table top with 2 screws (9).
SECURING THE BASE UNIT AND RAIL COVER
1 Align the wheel of the base unit with the rail of the chinrest base plate.
2 Insert the connection cable into the LAN output terminal of the instrument.
Patient grip
Chinrest base
To Next Page
Loading...
