Engine Oil Pressure Warning Light
T his light ( Figure 19 ) indicates dang erously lo w
engine oil pressure .
Charge Indicator
T he c harg e indicator ( Figure 19 ) illuminates when
the system c harging circuit malfunctions .
Enable/Disable Switch
Use the enable/disable switc h ( Figure 19 ) in
conjunction with the lo w er mo w/raise control
lev er to operate the reels . T he reels can be raised
but not lo w ered when in the mid position.
Backlap Switch
Use the bac klap switc h ( Figure 20 ) in conjunction
with the lo w er mo w/raise control lev er for
bac klapping the reels .
Figure 20
1. Backlap switch
Reel Speed Controls
T he reel speed controls ( Figure 21 ) control
the speed of front and rear cutting units . T he
first position is for bac klapping . T he remaining
positions are for mo wing operations .
Figure 21
1. Reel speed controls
Hour Meter
T he hour meter ( Figure 22 ) sho ws the total hours
that the mac hine has been operated.
Figure 22
1. Hour meter
24
To Next Page
Loading...
