Toro 07390 Workman HDX-Auto - Removing and Installing the Hood

Figure45
1.Frontjackingpoints
Figure46
1.Rearjackingpoints
RemovingandInstallingthe
Hood
RemovingtheHood
Removethehoodasfollows:
1.Whilegraspingthehoodintheheadlightopenings,lift
upthehoodtoreleasethelowermountingtabsfrom
theframeslots(Figure47).
Figure47
1.Hood
2.Pivotthebottomofthehoodupwarduntilyoucanpull
thetopmountingtabsfromtheframeslots(Figure47).
3.Pivotthetopofhoodforwardandunplugthewire
connectorsfromtheheadlights(Figure47).
4.Removethehood.
InstallingtheHood
1.Connectthelights.
2.Insertthetopmountingtabsintotheframeslots
(Figure47).
3.Insertthelowermountingtabsintotheframeslots
(Figure47).
4.Ensurethatthehoodisfullyengagedinthetop,sides,
andbottomgrooves.
38