Toro 07390 Workman HDX-Auto - Changing the Differential Oil

instep1,andtorquetheboltsto10.2to12.4N-m(90
to110in-lb).
CleaningtheClutches
ServiceInterval:Every400hours
1.Removethe9hex-washerbolts(1/4x1inch)that
securethetransmissioncovertothemountingplateof
thetransmission(Figure74).
Figure74
1.Hex-washerbolts(1/4x1
inch)
4.Mountingplate
2.Transmissioncover
5.Secondaryclutch
3.Primaryclutch
2.Attheprimaryandsecondaryclutches,Removedirt
andmudbuildupwithwateranddryimmediatelywith
compressedairtoremoveexcesswateranddebris.
3.Removeanyremainingdebrisusingafast-drying
contactcleanerorbrakecleaner.
Note:Note:Removethedebrisinandaroundmoving
parts.
4.Ifdebrisorbuildupexistsaroundthebeltoralongthe
clutchshaft,useaneabrasivepadorasimilarproduct
toremoveit.
5.Aligntheholesinthetransmissioncoverwiththeholes
inthemountingplate(Figure74).
6.Securethecovertothemountingplate(Figure74)with
the9hex-washerbolts(1/4x1inch)thatyouremoved
instep1,andtorquetheboltsto10.2to12.4N-m(90
to110in-lb).
MaintainingtheDifferential
andAxles
ChangingtheDifferentialOil
Oiltype:80W90APIGL-5
Oilcapacity:550ml(18.6oz)
1.Alignadrainpanunderthedrainplug(Figure75).
Figure75
1.Fillplug3.Drainport
2.Fillport4.Drainplug
2.Removethellplugfromthellportandthedrain
plugfromthedrainportofthedifferential(Figure75).
Note:Allowthedifferentialtocompletelydrain.
3.ChecktheconditionoftheO-ringsontheplugs.
Note:ReplacedamagedorwornO-rings.
4.Installthedrainplugintothedrainport(Figure75),
andtighttheplugto14to19N-m(10to14ft-lb).
Note:Thedrainplugismagnetic.Itisnormalto
seesmallamountsofferrous-metalparticlesaround
magnet—expectmoreparticlesaroundthemagnet
afterinitialbreak-in.
5.Add550ml(18.6oz)ofthespeciedoilintothell
portofthedifferential(Figure75).
Note:Useafunnelwithaexiblehosetoaddoilto
thedifferential.
6.Installthellplugintothellport(Figure75),and
tightentheplugto14to19N-m(10to14ft-lb).
50