CheckingtheBrakeFluid
ServiceInterval:Beforeeachuseordaily—Checkthebrake
uidlevel.(Checkthelevelbeforethe
engineisrststartedanddailythereafter.)
Every1,000hours/Every2years(whichevercomes
rst)—Changethebrakeuid.
Brakeuidtype:DOT3brakeuid
Note:Thebrake-uidreservoirisshippedfromthefactory
lledwithDOT3brakeuid.
Thebrake-uidreservoirislocatedunderthehoodandbelow
thedash.
1.Parkthemachineonalevelsurface.
2.Removethehood;refertoRemovingtheHood(page
38).
3.Checktheuidlevelinthebrake-uidreservoir(Figure
26andFigure27).
Note:TheuidlevelshouldbeuptotheFullline
onthereservoir.
Figure26
1.Brake-uidreservoir
Figure27
1.Brake-uidreservoir
4.Iftheuidlevelislow,performthefollowing:
A.Cleantheareaaroundthecapforthereservoir
(Figure27).
B.Removethereservoircap(Figure27).
C.AddthespeciedbrakeuidtotheFulllineon
thereservoir(Figure27).
Note:Donotoverllthebrake-uidreservoir.
D.Installthecap(Figure27).
5.Installthehood;refertoRemovingtheHood(page38).
CheckingtheOilPressure
WarningLight
ServiceInterval:Beforeeachuseordaily
Note:Ifyoujuststoppedtheengine,itmaytake1to2
minutesforthelighttocomeon.
1.Applytheparkingbrake.
2.TurntheignitionkeytotheOnposition,butdonot
starttheengine.
Note:Theoilpressurelightshouldglowred.
Note:Ifthelightdoesnotfunction,eitherabulb
isburnedoutorthereisamalfunctioninthesystem
whichmustberepaired.
24