7.Removethesiphoningequipmentfromthereservoir
(Figure91).
8.Add7.5L(2USgallons)—Non-TCmodelor15.1L
(4USgallons)—Non-TCmodelwiththeHighFlow
HydraulicKit(option)orTCmodelofthespecied
hydraulicuidintothehydraulicreservoir(Figure91).
Important:Useonlythehydraulicuids
specied.Otheruidscouldcausesystem
damage.
9.Installthedipstickandcaptothellerneckofthe
hydraulicreservoir(Figure91).
10.Starttheengineandoperatethevehicletollthe
hydraulicsystem.Checkthehydraulicoilleveland
replenishit,ifrequired.
RaisingtheBoxinan
Emergency
Youcanraisetheboxinanemergencywithoutstartingthe
enginebycrankingstarterorbyjumpinghydraulicsystem.
RaisingtheBoxUsingtheStarter
Note:Iftheenginewillnotcrank,youmustremovetheload
andbox(attachment)inordertoservicetheengine.
1.EnsurethatthetransmissionleverisintheP(park)
position;refertoTransmissionLever(page15).
2.Crankthestarterwhileholdingtheliftleverinthe
Raiseposition.
Note:Runthestarterfor15secondsthenwait60
secondsbeforeengagingthestarteragain.
RaisingtheBoxbyJumpingthe
HydraulicSystem
Note:Thisprocedurerequires2hydraulichoses,eachwith
amaleandafemalequickcoupler,thattsthecouplerson
thevehicle.
1.Backanothervehicleuptotherearofthedisabled
vehicle.
Important:ThehydraulicsystemusesMobil
M15.Toavoidsystemcontamination,makesure
thatthevehicleyouusetojumpthehydraulic
systemusesanequivalentuid.
2.Onbothvehicles,disconnectthe2quickcouplerhoses
fromthehosessecuredtothecouplerbracket(Figure
92).
Figure92
1.QuickcouplerhoseA
2.QuickcouplerhoseB
3.Onthedisabledvehicle,connectthe2jumperhosesto
thehosesthatweredisconnected(Figure93).
Note:Captheunusedttings.
Figure93
1.Disconnectedhoses2.Jumperhoses
4.Ontheothervehicle,connectthe2hosestothe
couplerstillinthecouplerbracket(connectthetop
hosetothetopcouplerandthebottomhosetothe
bottomcoupler)(Figure94).
Note:Captheunusedttings.
58