Toro 07390 Workman HDX-Auto - Lubrication; Greasing Bearings and Bushings

Lubrication
GreasingtheBearingsandthe
Bushings
ServiceInterval:Every100hours(lubricatemorefrequently
inheavydutyapplications).
Lubricationtype:No.2general-purpose,lithium-based
grease
Important:Whengreasingthedriveshaftuniversal
shaftbearingcrosses,pumpgreaseuntilitcomesout
ofall4cupsateachcross.
1.Wipeeachgreasettingcleansothatforeignmatter
cannotbeforcedintothebearingorbushing.
2.Connectthegreaseguntothegreasetting.
3.Pumpgreaseintoeachbearingorbushing.
4.Wipeoffanyexcessgrease.
Thegreasettinglocationsandquantitiesareasfollows:
•Balljoints(4);refertoFigure48
•Pivotmounts(2);refertoFigure48
•Steeringcylinder(2);refertoFigure48
•Tierods(2);refertoFigure48
Figure48
Springtower(2);refertoFigure49
Figure49
•Brake(1);refertoFigure50
•Throttle(1);refertoFigure50
Figure50
39