Toro 07390 Workman HDX-Auto - Changing Transmission Fluid

MaintainingtheTransmission
CheckingtheTransmission-uidLevel
ServiceInterval:Aftertherst50hours
Every400hours
TransmissionFluidType:DexronVI
1.Locatethellplugattheatthelower-inboardareaat
thebackofthetransmission(Figure67).
Figure67
1.Fillport(transmission)
2.Fillplug
2.Alignadrainpanbelowthellplug.
3.Rotatetheplugcounterclockwiseandremovetheplug
fromthellportinthetransmission(Figure67).
Note:Whenthetransmissionuidleveliscorrect,the
uidshouldbelevelwiththebottomofthethreads
inthellport.
4.Ifthetransmission-uidlevelislow ,addtransmission
uidofthespeciedtypeintothetransmissionthrough
thellportuntiltheuidlevelisushwiththebottom
ofthethreadsintheport(Figure67).
Note:Useafunnelwithaexiblehosewhenlling
thetransmission.
5.ChecktheconditionoftheO-ringatthellplug.
Note:ReplacetheO-ringifitiswarnordamaged.
6.Installthellplugintothetransmissionandtighten
ithandtight(Figure67).
ChangingtheTransmissionFluid
TransmissionFluidType:DexronVI
TransmissionFluidCapacity:700ml(23.7oz)
1.Movethemachinetoalevelsurface.
2.Locatethellplugatthebackinboardareaofthe
transmissioncaseandthelocatethedrainplugatthe
frontoutboardsideofthetransmission(Figure68and
Figure69).
Figure68
1.Fillplug3.Forward
2.Transmissioncase(back
inboardlocation)
Figure69
1.Forward2.Drainplug
3.Removethellplugfromthellportbyrotating
theplugcounterclockwiseandremovingitfromthe
transmission(Figure68).
4.Alignadrainpanbelowthedrainplug(Figure69).
47