Toro 07390 Workman HDX-Auto - Changing the Engine Oil and Filter

6.Cleanthedirtejectionportlocatedintheair-cleaner
cover,thedustvalvecavity,andthenreplacethedust
valve(Figure52).
7.Inspectthenewairlterforshippingdamage,checking
thesealingendofthelterandthebody.
Important:Donotuseadamagedelement.
8.Insertthenewairlterbyapplyinglightpressuretothe
outerrimoftheltertoseatitintheair-lterhousing
(Figure52).
9.Aligntheair-ltercoverwiththedustvalveatthe6
o’clockpositionwhenviewedfromtheleftendofthe
cover(Figure52).
10.Securethelatchoftheair-ltercover(Figure52).
Note:Resettheindicatorifitisshowingred(ifso
equipped).
ChangingtheEngineOiland
Filter
ServiceInterval:Aftertherst50hours
Every200hours
Engine-oilcapacity:2.0L(2.1quarts)ofoilinthecrankcase
(includingtheoillter)
OilType:ahigh-quality10W-30APIserviceclassication
SJorhigher.
ChooseaviscosityaccordingtothetableinFigure53.
Figure53
1.Raisethebed(ifsoequipped)andplacethebedsafety
supportontheextendedliftcylindertoholdupthe
bed;refertoRaisingtheCargoBox(page19)and
UsingtheBedSafetySupport(page36).
2.Alignadrainpanwitha2.5L(3.0quarts)capacity
undertheoil-drainplugfortheengine(Figure54).
Figure54
1.Engine-oildrainplug
2.Forward
3.Removethedrainplugandletoilowintoadrainpan
(Figure54).
Note:Whentheoilstopsdraining,installthedrain
plug.
4.Removetheoillterfromthelteradapter(Figure55).
Figure55
1.Forward3.Filteradapter
2.Oillter
5.Wipecleanthesealingbaseoftheofthelteradapter
(Figure55).
6.Applyalightcoatofcleanoiltothesealofthenew
lter.
7.Installthelteruntilthegasketcontactsthesealingbase
ofthelteradapter,thentightenthelterclockwise
andadditional1/2to2/3ofaturn(Figure55).
Note:Donotovertightentheengineoillter.
8.Addthespeciedoiltothecrankcaseoftheengine;
refertoCheckingtheEngine-oilLevel(page21).
9.Lowerthebed;refertoLoweringtheBox(page20).
41