Toro 07390 Workman HDX-Auto - Adjusting the Brake Pedal

AdjustingtheBrakePedal
ServiceInterval:Every200hours
1.Removethehood;refertoRemovingtheHood(page
38).
2.Removethecotterpinandclevispinsecuringthe
master-cylinderyoketothebrakepedalpivot(Figure
81).
Figure81
1.Cotterpin
4.Master-cylinderyoke
2.Brakepedalpivot5.Jamnut
3.Clevispin
3.Liftuponthebrakepedal(Figure82)untilitcontacts
theframe.
Figure82
1.Brakepedal2.Acceleratorpedal
4.Loosenthejamnutssecuringtheyoketothemaster
cylindershaft(Figure81).
5.Adjusttheyokeuntilitsholesalignwiththeholeinthe
brakepedalpivot(Figure81).
6.Securetheyoketothepedalpivotwiththeclevispin
andcotterpin(Figure81).
7.Tightenthejamnutsecuringtheyoketothemaster
cylindershaft(Figure81).
Note:Thebrake-mastercylindermustrelievethe
pressurefromtheservicebrakewhenitisproperly
adjusted.
8.Installthehood;refertoRemovingtheHood(page38).
53