Toro 23518 - Page 47

CAUTION
Raisingthemachineforserviceor
maintenancerelyingsolelyonmechanical
orhydraulicjackscouldbedangerous.The
mechanicalorhydraulicjacksmaynotbe
enoughsupportormaymalfunctionallowing
themachinetofall,whichcouldcauseinjury.
Donotrelysolelyonmechanicalorhydraulic
jacksforsupport.Useadequatejackstands
orequivalentsupport.
2.Alignadrainpanunderthesightplugsofthe
transmissions(Figure64andFigure65).
Figure64
Lefttransmissionshown
1.Sightplug
3.Up
2.Sight-plugport
Figure65
Lefttransmissionshown
1.Sightplug
3.Up
2.Sight-plugport
3.Attheinboardsideofthetransmission,nearthetop,
removethesightplugfrom1ofthetransmissions
(Figure64andFigure65).
4.Addthespeciedoiltotheexpansiontankuntiloil
owfromthesight-plugport;refertoCheckingthe
Transmission-OilLevel(page46).
5.Installthesightplugandtorqueitto244N-m(180
in-lb).
6.Repeatsteps3through5fortheothertransmission.
7.Addthespeciedoilintotheexpansiontankuntilthe
oillevelisattheFullColdlineofthetank.
8.Starttheengineandmovethethrottletothe1/2
enginespeedposition.
9.Releasetheparkingbrake.
10.Slowlymovethetraction-controlleversinthe
forwardandreversedirections5to6times;referto
Traction-ControlLevers(page14).
Note:Cyclingthetraction-controlsforwardand
reversepurgesairfromthetransmissions.
11.Stoppingtheengine.
12.Checktheoillevelintheexpansiontank,andadd
thespeciedoilasrequired;refertoCheckingthe
Transmission-OilLevel(page46).
13.Repeatsteps8through12untilalltheairiscompletely
purgedfromthetransmissions.
Note:Theairispurgedwhenthetransmissionswhen
thetransmissionsoperateatnormalnoiselevelsand
smoothlymoveforwardandreverseatnormalspeeds.
14.Lowerthemachineandremovethejackstands.
47