Toro 30488 - Troubleshooting

Troubleshooting
Problem
PossibleCauseCorrectiveAction
1.Fueltankisempty.
1.Fillthefueltankwithgasoline.
2.Chokeisnoton.
2.Movethechokelevertochokeposition.
3.Aircleanerisdirty.
3.Servicetheair-cleanerelement.
4.Spark-plugwireislooseor
disconnected.
4.Installthewireonthesparkplug.
5.Sparkplugispitted,fouled,orthegap
isincorrect.
5.Installanew,correctlygappedspark
plug.
6.Dirtinthefuellter.6.Replacethefuellter.
7.Dirt,water,orstalefuelisinthefuel
system.
7.ContactanAuthorizedServiceDealer.
Theenginewillnotstart,startshard,or
failstokeeprunning.
8.Thegapbetweentheneutralswitch
boltandtheswitchisnotcorrect.
8.ContactanAuthorizedServiceDealer.
1.Engineloadisexcessive.1.Reducethegroundspeed.
2.Aircleanerisdirty.
2.Servicetheaircleaner.
3.Oillevelinthecrankcaseislow.
3.Addoiltothecrankcase.
4.Coolingnsandairpassagesunder
theengineblowerhousingareplugged.
4.Removetheobstructionfromthe
coolingnsandairpassages.
5.Sparkplugispitted,fouled,orthegap
isincorrect.
5.Installanew,correctlygappedspark
plug.
6.Ventholeinthefuelcapisplugged.6.Cleanorreplacethefuelcap.
7.Dirtinthefuellter.7.Replacethefuellter.
Theenginelosespower.
8.Dirt,water,orstalefuelisinthefuel
system.
8.ContactanAuthorizedServiceDealer.
1.Engineloadisexcessive.1.Reducethegroundspeed.
2.Oillevelinthecrankcaseislow.
2.Addoiltothecrankcase.
Theengineoverheats.
3.Coolingnsandairpassagesunder
theengineblowerhousingareplugged.
3.Removetheobstructionfromthe
coolingnsandairpassages.
1.Hydraulicoilreservoirlow.1.Addhydraulicoiltothereservoir.
2.Airinthehydraulicsystem.2.Bleedtheairoutthehydraulicsystem.
3.Pumpdrivebeltslipping.3.Replacethepumpdrivebelt.
Themachinedoesnotdrive.
4.Pumpdrivebeltidlerspringmissing.4.Replacethepumpdrivebeltidler
spring.
1.Cuttingblade(s)is/arebentor
unbalanced.
1.Installnewcuttingblade(s).
2.Blademountingboltisloose.2.Tightentheblademountingbolt.
3.Enginemountingboltsareloose.3.Tightentheenginemountingbolts.
4.Looseenginepulley,idlerpulley,or
bladepulley.
4.Tightentheappropriatepulley.
5.Enginepulleyisdamaged.
5.ContactanAuthorizedServiceDealer.
Thereisanabnormalvibration.
6.Bladespindleisbent.
6.ContactanAuthorizedServiceDealer.
1.Blade(s)notsharp.1.Sharpentheblade(s).
2.Cuttingblade(s)is/arebent.2.Installnewcuttingblade(s).
3.Mowerisnotlevel.3.Levelthemowerside-to-sideposition.
4.Mowerpitchiswrong.
4.Adjustthefront-to-rearpitch.
5.Undersideofmowerisdirty.5.Cleantheundersideofthemower.
6.Tirepressureisnotcorrect.6.Adjustthetirepressure.
Thecuttingheightisuneven.
7.Bladespindlebent.
7.ContactanAuthorizedServiceDealer.
54