Toro 34230 - User Manual

FormNo.3435-715RevA
Stand-OnE-Spreader/Sprayer
ModelNo.34230—SerialNo.400000000andUp
Registeratwww.Toro.com.
OriginalInstructions(EN)
*3435-715*A

Toro 34230 Specifications

General

Model	34230
Power Source	Electric
Power	0.5 HP
Max Pressure	3000 psi
Maximum Pressure	3000 psi
Hose Length	25 ft
Spray Tip Included	Yes
Type	Airless

Summary

Safety Information

Safety-Alert Symbol and General Safety

Explains the safety-alert symbol and provides essential safety guidelines for operating the machine.

Safety and Instructional Decals

Identifies and explains various safety signs and instruction labels on the machine.

Setup and Product Overview

Initial Setup Procedures

Checks for tire pressure, engine oil level, and transaxle fluid level before operation.

Product Overview and Battery Connection

Describes the machine's components and provides steps for connecting the battery.

Machine Controls

Steering and Motion Controls

Explains operation of steering control and motion-control lever for machine movement.

Brake and Release Levers

Details the function of the parking-brake and drive-wheel-release levers.

Engine Controls and Fuel System

Ignition, Choke, Throttle, and Hour Meter

Operation of engine controls for starting, speed adjustment, and monitoring.

Fuel-Shutoff Valve Operation

Instructions for opening and closing the fuel-shutoff valve.

Spreader Controls

Deflector Gate and Granular Controls

How to use deflector gate and granular gate levers for material discharge.

Pattern, Flow-Rate, and Impeller Controls

Adjusting spreader pattern, flow rate, and impeller operation.

Sprayer Controls and Information

Spreader and Information Display

Explanation of spreader and sprayer information displays and their components.

Sprayer Pattern and Agitation Controls

Operation of spray pattern levers and tank agitation.

Spray Wand and Pump Controls

Operation of spray wand trigger, lock, pressure control, and pump switch.

Specifications

Machine Specifications

Lists key technical specifications of the machine, including dimensions, weight, and capacity.

Operation Before Use

Before Operation Safety

Essential safety precautions to take before operating the machine.

Chemical Safety Precautions

Safety measures for handling and using chemicals with the sprayer.

Fuel Safety and Daily Maintenance

Fuel Safety Guidelines

Important safety information regarding the handling and storage of fuel.

Performing Daily Maintenance Checks

Daily checks to ensure the machine is ready for safe operation.

During Operation Safety

General Operation Safety

Comprehensive safety rules for operating the machine safely.

Slope Operation Safety

Specific safety guidelines for operating the machine on slopes.

Driving the Machine

Forward and Reverse Driving

Steps for driving the machine forward and in reverse.

Turning and Stopping Procedures

How to safely turn and stop the machine.

Spreader Operation

Spreader Screen Information

Explanation of spreader screen icons, displays, and start-up screens.

Operating the Spreader

Instructions for using the impeller control switch and operating the spreader.

Spreader Calibration

Test Site Preparation

Steps to prepare the test site and equipment for spreader calibration.

Distribution Pattern and Application Rate

Methods to determine distribution pattern and calculate application rate.

Spreader Maintenance

Emptying the Spreader

Procedures for removing the impeller and disconnecting the rate-gate linkage.

Cleaning and Lubricating the Spreader

Steps for cleaning and lubricating the spreader after each use.

Spreading Material

Using the Deflector Gate

How to use the deflector gate to control material spread.

Spreading Material Procedure

Step-by-step guide for spreading materials with the machine.

Sprayer Operation

Sprayer Information Displays and Controls

Explanation of sprayer screen icons, LED lights, and operation controls.

Calibrating the Sprayer and Ground Speed

Procedures to calibrate the sprayer and calculate ground speed.

Sprayer Nozzle Testing

Testing Sprayer Nozzle Discharge

Procedure to test and record the discharge rate of each sprayer nozzle.

Application Rate Determination

Methods and tables for determining the application rate.

Using the Sprayer

Filling the Spray Tank

Instructions for safely filling the spray tank with chemicals and water.

Spraying with the Sprayer Boom

Procedures for spraying using the machine's boom.

Spraying with Spray Wand

After Operation Safety

Safety precautions to follow after completing spraying operations.

Spraying with the Spray Wand

Instructions for operating the spray wand.

Maintenance Procedures

Maintenance Safety Guidelines

Critical safety rules to follow while performing maintenance on the machine.

Recommended Maintenance Schedule

A schedule outlining maintenance tasks based on service intervals.

Pre-Maintenance and Lubrication

Preparing the Machine for Maintenance

Steps to take before performing any maintenance or adjustment.

Lubricating Grease Fittings

Procedure for lubricating the machine's grease fittings.

Engine Maintenance

Servicing the Air Cleaner

Instructions for servicing the engine's air cleaner assembly.

Engine Oil Level and Change

How to check and change the engine oil level.

Spark Plug Servicing

Instructions for servicing the spark plug.

Fuel and Electrical System Maintenance

Draining the Fuel System

Steps to safely drain the fuel system for maintenance.

Servicing the Battery

Guidelines for cleaning, charging, and maintaining the machine's battery.

Battery and Jump-Starting Procedures

Checking the Battery Charge

Procedure to check the battery's voltage and determine its charge state.

Charging and Jump-Starting the Battery

Safe procedures for charging and jump-starting the machine's battery.

Fuses and Drive System Maintenance

Servicing the Fuses

Instructions for checking and replacing fuses in the electrical system.

Drive System Maintenance

Tasks for maintaining the drive system, including tire pressure and wheel alignment.

Chassis and Controls System Maintenance

Servicing the Transaxle

Maintenance procedures for the machine's transaxle.

Adjusting Spreader Pattern Control Cable

How to adjust the pattern control cable for the spreader.

Checking for Loose Hardware

Routine inspection to ensure all hardware is tight and secure.

Sprayer System and Cleaning Procedures

Checking the Sprayer System

How to check hoses, nozzles, and strainers for the sprayer system.

Cleaning Engine and Exhaust Area

How to clean debris from the engine and exhaust system area.

Sprayer Component Cleaning

Procedures for cleaning sprayer system components and wand.

Storage and Winterizing

Machine Storage Guidelines

Recommendations for storing the machine properly.

Preparing for Extended or Winter Storage

Steps to prepare the machine for long-term or winter storage.

Winterizing the Sprayer System

Procedures to winterize the sprayer system to prevent damage.

Troubleshooting

Spreader Fault Codes

Identifies and explains spreader fault codes and their causes.

Sprayer Fault Codes

Lists and explains sprayer fault codes and potential solutions.

Troubleshooting Machine Issues

Solutions for engine, performance, and operational problems.

Schematics

Electrical Schematic

Provides the electrical wiring diagram for the machine.

Sprayer System Schematic

Details the hydraulic and fluid schematic for the sprayer system.