Toro 72923 - User Manual

Questions and Answers

A
Adrian ThomasAug 29, 2025
Why does my Toro Lawn Mower engine not start?
- P
  Patricia JacobsAug 29, 2025
  If your Toro Lawn Mower engine is not starting, starts with difficulty, or stops running, try the following: * Fill the fuel tank. * Open the fuel-shutoff valve. * Add oil to the crankcase. * Ensure the throttle control is midway between the SLOW and FAST positions. * Replace the fuel filter. * Clean or replace the air-cleaner element. * Check the seat-switch indicator; replace the seat if needed. * Check the electrical connections for good contact; clean the connector terminals thoroughly with electrical-contact cleaner, apply dielectric grease, and make the appropriate connections. * Adjust or replace the spark plug. * Check the spark-plug wire connection.
B
Brandon RiveraAug 28, 2025
Why won't my Toro 72923 Lawn Mower engine start?
- P
  powelllisaAug 29, 2025
  If your Toro Lawn Mower engine won't start, struggles to start, or stalls, several factors could be at play. First, ensure the fuel tank isn't empty and the fuel-shutoff valve is open. Check the oil level in the crankcase and add oil if it's low. Position the throttle control midway between the SLOW and FAST settings. Replace a dirty fuel filter and clean or replace a dirty air-cleaner element. Inspect the spark plug for fouling or improper gapping, adjusting or replacing it as needed. Also, verify the spark-plug wire connection. If the seat switch isn't working right, check the seat-switch indicator and replace the seat if needed. Finally, examine the electrical connections for corrosion, looseness, or damage, cleaning and reconnecting them as necessary.
D
David ShawAug 28, 2025
Why won't my Toro 72923 starter crank?
- S
  Sarah RoseAug 28, 2025
  If the starter on your Toro Lawn Mower doesn't crank, there are several possible reasons. First, ensure the blade control switch (PTO) is disengaged and the parking brake is set. Also, make sure the drive levers are in the neutral lock position and that you are seated on the seat. If these aren't the problem, check if the battery is dead and charge it if necessary. Inspect the electrical connections for corrosion or looseness, and replace the fuse if it's blown.
C
campbelllisaSep 5, 2025
Why is my Toro Lawn Mower resulting in uneven cutting height?
- J
  Joann PerezSep 5, 2025
  Uneven cutting height with your Toro Lawn Mower can be attributed to several factors. Start by sharpening the blades, and replace them if they are bent. Ensure the mower deck is level from side-to-side and front-to-rear. Clean the underside of the mower, and adjust the tire pressure.
B
Brittney PalmerSep 7, 2025
Why does my Toro 72923 pull to the left or right?
- C
  Chase JohnsonSep 7, 2025
  If your mower pulls to one side, the tracking may need adjustment, or the tire pressure in the drive tires may not be correct. Adjust the tracking and the tire pressure in the drive tires.
J
Jennifer WatsonSep 10, 2025
Why don't the blades rotate on my Toro 72923 Lawn Mower?
- R
  rgarciaSep 10, 2025
  If the blades on your Toro Lawn Mower aren't rotating, it could be due to a worn, loose, or broken mower deck belt, the mower deck belt being off the pulley, a worn, loose, or broken pump drive belt, or a broken or missing idler spring. Try installing a new deck belt, installing the mower deck pulley and checking the idler pulley, idler arm, and spring for correct position and function, checking the belt tension or installing a new belt, and replacing the spring.
B
baileydavidSep 23, 2025
Why is there abnormal vibration in my Toro 72923 Lawn Mower?
- C
  Cindy MillerSep 23, 2025
  Abnormal vibration in your Toro Lawn Mower can stem from several causes. Check the cutting blades for bending or imbalance; replace them if necessary. Tighten the blade mounting bolt and the engine mounting bolts. Also, tighten the engine pulley, idler pulley, or blade pulley as needed.
A
allenphillipsSep 22, 2025
What to do if the blades do not rotate on my Toro 72923 Lawn Mower?
- R
  Robert FullerSep 22, 2025
  If the blades do not rotate on your Toro Lawn Mower, install a new deck belt if the mower deck belt is damaged, worn, loose, or broken. Install the mower belt on the deck pulley and check the idler pulley, idler arm, and spring for correct position and function if the mower deck belt is off the pulley. Check the belt tension or install a new belt if the pump drive belt is worn, loose, or broken. Replace the spring if the idler spring is broken or missing.
L
Luis GomezAug 25, 2025
How to fix a Toro 72923 Lawn Mower engine that loses power?
- J
  Jacob Fisher DDSAug 26, 2025
  If your Toro Lawn Mower engine is losing power, it could be due to several reasons. First, check if the engine load is excessive and reduce the ground speed. A dirty air cleaner can also cause power loss, so clean the air-cleaner element. Ensure that the oil level in the crankcase is adequate, adding oil if necessary. Additionally, inspect the cooling fins and air passages above the engine for any obstructions and remove them. Lastly, the vent hole in the fuel cap may be plugged, so clean or replace the fuel cap.
N
Nathaniel MitchellAug 25, 2025
What to do if my Toro 72923 engine does not start?
- B
  Barbara IngramAug 26, 2025
  If your Toro Lawn Mower engine doesn't start, starts hard, or fails to keep running, several factors could be at play. First, ensure the fuel tank isn't empty and the fuel-shutoff valve is open. Check that the oil level in the crankcase is sufficient and the throttle is positioned midway between the SLOW and FAST settings. Also, a dirty fuel filter or air cleaner can cause issues, so replace or clean them as needed. Inspect the spark plug, adjusting or replacing it if it's fouled or improperly gapped, and verify the spark-plug wire is securely connected. Finally, check the seat-switch indicator, replacing the seat if necessary.

Toro 72923 Specifications

General

Brand	Toro
Model	72923
Starting System	Recoil
Weight	80 lbs
Oil Capacity	20 oz
Starter Type	Recoil
Mulching Capability	Yes
Bagging Capability	Yes
Side Discharge Capability	Yes
Clearing/Cutting Width	22 inches
Engine	Briggs & Stratton