Why won't the wheel motor on my Toro Groundsmaster 3505-D Lawn Mower hold load in neutral?
If the wheel motor on your Toro Lawn Mower will not hold a load in neutral, it could be because make up fluid from the charge pump is not available, or the hydrostat ball check valves are damaged. Ensure make up fluid from charge pump is available and inspect and replace damaged hydrostat ball check valves.
Why is the cutting unit gear pump on my Toro Groundsmaster 3505-D so noisy?
If the cutting unit gear pump (P1) on your Toro Lawn Mower is noisy (cavitation), it could be due to a low reservoir oil level, a restricted suction line, or an air leak in the suction line. Refill the oil reservoir to the proper level, clear any restrictions in the suction line, or inspect and repair any air leaks in the suction line.
Why does my Toro Lawn Mower turn in the opposite direction when steering?
If turning the steering wheel turns the machine in the opposite direction on your Toro Lawn Mower, the hoses to the steering cylinder may be reversed. Correct the hose connection to the steering cylinder.
General| Transmission | Hydrostatic |
|---|---|
| Number of Blades | 3 |
| Tire Size (Rear) | 20 x 10-10 |
| Speed Range | 0 to 10 mph |
| Turning Radius | 18 inches |
General safety guidelines and warnings for operating the machine.
Information regarding California's Proposition 65 warning.
Essential safety precautions and warnings for machine operation.
Explanation and identification of safety decals on the machine.
Safety related to Rollover Protection System and operating on slopes.
Verifying shipped parts and media before assembly.
Procedure for activating, charging, and connecting the battery.
Instructions for installing the CE warning and mark decals.
Steps to install hood latch and exhaust guard on CE models.
Adjusting lift arms and carrier frame for cutting units.
Methods for adjusting cutting height and roller scraper.
Instructions for installing the mulching baffle.
Identification and function of various machine controls and indicators.
Operation of pedals, steering, and throttle.
Key switch, indicator lights, and monitoring functions.
Function of the slide for switching between mowing and transport modes.
Safety checks and precautions before starting the machine.
Safe handling, storage, and filling of fuel.
Safety guidelines to follow while operating the machine.
Procedures for safely starting and stopping the engine.
Advice for efficient and proper machine operation.
Safety precautions and recommended maintenance tasks and intervals.
Daily checks to ensure proper machine function and safety.
Greasing points and procedures for bearings and bushings.
Servicing the engine, air cleaner, and oil.
Maintenance of fuel tank, water separator, and fuel filter.
Servicing the battery and fuses for the electrical system.
Checking tire pressure, wheel lug nuts, and traction drive.
Checking and cleaning the engine's cooling system.
Adjusting parking brake and servicing engine belts.
Adjusting the throttle control system.
Servicing hydraulic fluid, changing fluid and filter.
Separating, mounting, and servicing cutting units and blades.
Inspecting, sharpening, and replacing blades.
Safety precautions for storing the machine.
Steps to prepare the traction unit and engine for storage.
Proper procedure for storing detached cutting units.
To Next Page
