Toro GT series - Page 197

HYDROSTATIC DRIVE SYSTEM
6-10 GT Series Tractors Service Manual
6
16. Remove the actuator bracket/spring switch (Fig.
674).
18. Remove the hairpin cotter securing the bypass lever
to the bypass bracket on the transmission (Fig. 676).
Fig 674 PICT-7546
Fig 676 PICT-7556
19. Remove the return spring from the bypass lever (Fig.
677).
17. Remove the screw securing the harness ground
(Fig. 675).
Fig 677 PICT-7558
Fig 675 PICT-7544