MOWER DECK
7-47GT Series Tractors Service Manual
7
54” Mower Deck Spring Loaded Idler
Installation
8. Remove the shoulder bolt, idler bracket and stabi-
lizer bracket from the mower deck (Fig. 902).
2. Install a lock washer and nut onto the shoulder bolt
to secure the idler bracket to the mower deck (Fig.
904).
Fig 902 PICT-7868
Fig 904 PICT-7863
3. Hook the idler spring to the idler bracket and using
a spring removal tool (Toro part no. 92-5771), hook
the idler spring to the spring post on the mower deck
(Fig. 905).
1. Position the stabilizer bracket and idler bracket to
the mower deck. Insert a shoulder bolt through the
idler and stabilizer brackets and then through the
mower deck (Fig. 903).
Fig 905 PICT-7859
Fig 903 PICT-7868
To Next Page
Loading...
