MOWER DECK
7-53LX Lawn Tractor Service Manual
7
12. Remove the second bearing from the pulley side of
the housing (Fig. 747).
15. Secure the housing assembly into a vise and stake
the bearing (Fig. 749).
Fig 749 PICT-8011a
Fig 747 PICT-8005
13. Inspect the bearings and spacers and replace if
worn or damaged.
14. Press the blade side bearing into the housing (Fig.
748).
Fig 748 PICT-8008
11. Remove the bearing and spacer from the blade side
of the housing (Fig. 746).
Note: Since this bearing is staked in place it WILL
be damaged if removed.
Fig 746 PICT-8004
To Next Page
Loading...
