Toro Multi Pro 5800-G - Cleaning the Sprayer System; Draining the Tank; Cleaning Internal Sprayer Components

Important:Donotwashthemachinewiththe
enginerunning.Washingthemachinewiththe
enginerunningmayresultininternalengine
damage.
CleaningtheSprayerSystem
DrainingtheTank
1.Stopthesprayer,engagetheparkingbrake,
shutofftheengine,andremovethekey.
2.Locatethetank-drainvalveattheleft,rear
fenderofthemachine(Figure49).
Note:Thedrainvalveisattachedtothe
drain-valvebracketthatismountedtotheleft,
rearfender.
g191084
Figure49
1.Drainvalve(sprayertank)
3.Liftthevalveuntilthemountstudsofthevalve
cleartheslotsinthedrain-valvebracket,and
movethevalverearward(Figure50A).
g191083
Figure50
1.Drain-valvebracket
3.Drainvalvehandle(open
position)
2.Mountstuds(drainvalve)
4.Aligntheendofthevalvewiththedrain
containerandrotatevalvehandletotheopen
position(Figure50B).
5.Whenthetankhasdrainedcompletely,rotate
thedrain-valvehandletotheclosedpositionand
assemblethevalveontothedrain-valvebracket
(Figure50BandFigure50A).
Important:Disposeofthesprayertank
chemicalsaccordingtolocalcodesandthe
materialmanufacturer'sinstructions.
CleaningInternalSprayerComponents
Important:Useonlycleanwaterwhencleaning
thesprayer.
Important:Youmustalwaysdrainandush
outthesprayer,includinganyinstalledspray
systemaccessoriesimmediatelyaftereachuse.
Failuretoushandcleanthesprayermayallow
thechemicalstodryandobstructinthelines,
lters,valves,nozzlebodies,pump,andother
components.
TororecommendsusingtheapprovedCleanRinse
Kitforthismachine.ContactyourauthorizedT oro
distributorformoreinformation.
Note:Therecommendationsandinstructionsthat
followassumethattheT oroRinseKitisnotinstalled.
41