Toro Reelmaster 5010- H - Page 124

Reelmaster 5010- HHydraulic System Page 4 - 88
CrossTrax
TM
AWD Manifold Service (Machines with Optional CrossTrax
TM
Kit)
1. CrossTrax AWD manifold
2. O- ring
3. Plug (NWD #6)
4. Seal kit
5. Check valve
6. Plug (NWD #4)
7. O- ring
8. Orifice (.040)
9. Plug (NWD #8)
10. O- ring
11. Seal kit
12. Bi- Directional relief valve
Figure 74
4
3
1
2
9
10
11
8
5
6
7
12
2
2
3
3
4
5
6
7
(33 N- m)
25 ft- lb
(33 N- m)
25 ft- lb
120 in- lb
(13.5 N- m)
(62 N- m)
46 ft- lb
220 in- lb
(24.8 N- m)
220 in- lb
(24.8 N- m)
220 in- lb
(24.8 N- m)
For CrossTrax
TM
AWD control manifold service proce-
dures, see Control Manifold Cartridge Valve Service in
this section. Refer to Figure 74 for cartridge valve and
plug installation torque.
NOTE: Adjustment of bi- directional relief valve (item
12) is NOT recommended.