Reelmaster 5010- HHydraulic System Page 4 - 2
Specifications
Item Description
Piston (Traction) Pump Closed Circuit Axial Piston Design
Maximum Pump Displacement (per revolution) 2.14 Cubic Inches (35 cc)
Gear Pump 2 Section, Positive Displacement Gear Type Pump
Section P1 Displacement (per revolution) (all models) 0.24 Cubic Inches (3.96 cc)
Section P2 Displacement (per revolution) (all models) 0.40 Cubic Inches (6.61 cc)
Charge Circuit Relief (R5) Pressure 200PSI(14bar)
Traction Circuit Relief Pressure: Forward (R3) and Reverse (R4) 3625 PSI (250 bar)
Front Wheel Motors Geroler Motor
Displacement (per revolution) 24.7 in
3
(405 cc)
Rear Wheel Motors (if equipped) Rotor Motor
Displacement (per revolution) 19.0 in
3
(310 cc)
Steering Valve Hydrostatic Steering Unit, Open Center
Displacement (per revolution) 6.1 in
3
(100 cc)
Steering Circuit Relief (R10) Pressure 1000 PSI (70 bar)
Lift Circuit Relief (SVRV) Pressure 2000 PSI (138 bar)
Lift Circuit Lower Relief (R7) Pressure 500PSI(35bar)
Hydraulic Filter (Steering Circuit) Spin- on Cartridge Type with 25 PSI (1.7 bar) Relief i n Adapter
Hydraulic Oil See Traction Unit Operator’s Manual
Hydraulic Reservoir Capacity 11 U.S. Gallons (41.6 L)
To Next Page
Loading...
