Gasoline Engine Page 3 - 6 Sand Pro 2040Z
Fuel Tank
1. Flange nut (2 used)
2. Bushing (2 used)
3. 90
o
elbow fitting
4. Carbon canister
5. Fuel hose
6. Clean air filter
7. Tie clip (4 used)
8. Washer head screw
9. Fuel tank cap
10. Clamp (2 used)
11. Flat washer (2 used)
12. Cap screw (2 used)
13. Fuel tank
14. Hose clamp (2 used)
15. Fuel s upply hose
16. Vacuum control valve
17. Fuel hose (2 used)
18. Hose clamp
19. Cap screw (2 used)
20. Recessed bumper (2 used)
21. Tank mount bracket
22. Vent hose (to intake manifold)
23. Vent hose (to air intake tube)
24. Stand tube
25. U- nut (2 used)
Figure 3
FRONT
RIGHT
2
3
6
8
9
10
11
13
1
5
7
12
14
15
16
17
18
19
20
4
21
22
23
24
10
14
7
7
2
17
25
DANGER
Because gasoline is highly flammable, use cau-
tion when storing o r handling it. Do not smoke
while cleaning the fuel tank. Do not work on the
fuel tank while e ngin e is running, hot or when
machine is in an enclosed area. Always fill fuel
tank outside and clean up any spilled fuel before
starting the engine. Store fuel in a clean, safety-
approved container and keep fuel cap in place.
Use gasoline for the engine only; not for any
other purpose.
Check Fuel Lines and Connections
Check fuel lines and connections periodically as recom-
mended in the Operator’s Manual. Check lines for dete-
rioration, damage, leaks or loose connections. Replace
hoses, clamps and connections as necessary.
Empty and Clean Fuel Tank
IMPORTANT: If fuel tank is to be emptied, empty fuel
in a well ventilated area.
Empty and clean the fuel tank periodically as recom-
mended in the Operator’s Manual. Also, empty and
clean the fuel tank if the fuel system becomes contami -
natedorifthemachineistobestoredforanextended
period.
To Next Page
Loading...
