Gasoline Engine Page 3 - 14 Sand Pro 2040Z
Fuel Evaporative Control System Service
1. Fuel hose (2 used)
2. Bushing
3. 90
o
elbow fitting
4. Carbon canister
5. Fuel hose
6. Clean air filter
7. Tie clip (3 used)
8. Hose clamp
9. Vacuum control valve
10. Vent hose (to intake manifold)
11. Vent hose (to air intake tube)
12. Fuel tank
13. Fuel supply hose
Figure 14
FRONT
RIGHT
3
6
8
9
11
13
1
5
7
12
4
10
2
1
7
Disassembly (Fig. 14)
DANGER
Gasoline is flammable. Use caution when storing
or handling it. Wipe up any spilled fuel before
starting the engine.
1. If necessary to access fuel evaporative control sys-
tem components, remove seat support plate with at-
tached operator seat from machine (see Operator Seat
in the Service and Repairs section of Chapter 6 -
Chassis).
Figure 15
CARBON CANISTER CONNECTIONS
To Next Page
Loading...
