Lowering the Hopper without Power (continued)
G385185
5. Disconnect the hose fittings in the manifold
block and allow the fluid to drain into the pan.
Note: Dispose of the used fluid at a certified
recycling center.
6. Connect the hose fittings.
7. Use a hoist or have 2 people hold up the
hopper and remove the cylinder lock.
8. Carefully lower the hopper.
9. After making repairs, install the hoses to the
manifold block fittings.
10. Add hydraulic fluid.
3462-915A Page 4–10 Operation: After Operation
To Next Page
Loading...
