Haul the Machine
Use a heavy-duty trailer or truck to haul the machine. Use a full-width ramp. Ensure that the
trailer or truck has all the necessary brakes, lighting, and marking as required by law. Please
carefully read all the safety instructions. Knowing this information could help you or
bystanders avoid injury. Refer to your local ordinances for trailer and tie-down requirements.
WARNING
Driving on the street or roadway without turn signals, lights, reflective markings, or a
slow-moving-vehicle emblem is dangerous and can lead to accidents causing
personal injury.
Do not drive the machine on a public street or roadway.
Selecting a Trailer
WARNING
Loading a machine onto a trailer or truck increases the possibility of tip-over and
could cause serious injury or death.
• Use only full-width ramps.
• Ensure that the length of ramp is at least 4 times as long as the height of the trailer
or truck bed to the ground. This ensures that ramp angle does not exceed 15
degrees on flat ground.
G229507
Full-width ramp in stowed position
Ramp is at least 4 times as long as
the height of the trailer or truck bed to
the ground
H = height of the trailer or truck bed
to the ground
Trailer
3462-915A Page 4–12 Operation: After Operation
To Next Page
Loading...
Need help?
General
