Cleaning
Removing Debris
IMPORTANT
Operating the engine with blocked screens, dirty or plugged cooling fins, and/or
cooling shrouds removed, will result in engine damage from overheating.
1. Park the machine on a level surface and shut off the engine. Allow the engine to cool.
2. Unlatch and remove the cowl.
3. Clean any debris from under the hopper.
4. Wipe away debris from the air cleaner.
5. Clean any debris buildup on the engine and in the transmission with a brush or blower.
IMPORTANT
It is preferable to blow dirt out rather than washing it out. If you use water, keep it
away from electrical items and hydraulic valves.
Do not use a high-pressure washer. High-pressure washing can damage the electrical
system and hydraulic valves or deplete grease.
3462-915A Page 5–30 Maintenance: Cleaning
To Next Page
Loading...
