Removing Debris from the Machine (continued)
5. Wipe away debris from the air cleaner.
6. Clean any debris buildup on the engine and in the transmission with a brush or blower.
IMPORTANT
Blow out dirt rather than wash it out. If you use water, keep it away from electrical
parts and hydraulic valves. Do not use a high-pressure washer. High-pressure
washing can damage the electrical system and hydraulic valves or deplete grease.
Lowering the Hopper without Power
G384891
1. Install the cylinder lock.
2. Ensure that the tub is empty.
3. Place a large drain pan under the hydraulic-
manifold block.
G384893
4. Remove the access panel.
Operation: After Operation Page 4–9 3462-915 A
To Next Page
Loading...
Need help?
General
