Recommended Maintenance Schedule
Maintenance
Service Interval
Maintenance Procedure Part No.
Qty Description
Before each use or
daily
Check the engine oil level.
- - -
Clean the blower housing.
- - -
Check the tracks. - - -
Check the parking brake
operation.
- - -
Check the hydraulic fluid for the
drive system.
- - -
Check the hydraulic fluid for the
lift and slew system.
- - -
Check for loose fasteners. - - -
Remove debris from the machine. - - -
After the first 10
hours
Check and adjust the track
tension.
- - -
Every 25 hours
Service the air cleaner foam
element.
- - -
Every 40 hours Check the hydraulic lines.
- - -
Every 50 hours
Grease and oil the machine. - - -
Check and adjust the track
tension
- - -
Check the battery.
- - -
Every 100 hours
Change the engine oil.
- - -
Change the engine oil filter.
- - -
Replace the air cleaner paper
element.
- - -
Replace the fuel filter.
- - -
Check the spark plug.
- - -
Clean the cooling areas under the
cooling shrouds.
- - -
Inspect the drive belt.
- - -
Clean the chassis. - - -
Every 300 hours
Check the road wheels. - - -
Replace the spark plug.
- - -
Replace the drive belt.
139-1295 1 Belt
Change the hydraulic fluid for the
drive system.
108-1184 1
Toro premium transmission/
hydraulic fluid
Change the hydraulic fluid for the
lift and slew system.
114-4714 2
Toro hypr-oil 500
Change the hydraulic filters for
the drive system.
137-3772 2 Filter
Change the hydraulic filter for the
lift and slew system.
1-633750 1 Filter
3462-915A Page 5–2 Maintenance: Recommended Maintenance Schedule
To Next Page
Loading...
