Chapter 6
Storage
Storage Safety
• Shut off the engine, remove the key (if applicable), wait for all moving parts to stop, and
allow the machine to cool before storing it.
• Do not store the machine or fuel near flames.
Preparing the Machine for Storage Over 30
Days
1. Park the machine on a level surface, engage the parking brake, and lower the hopper.
2. Shut off the engine and remove the key.
3. Remove dirt and grime from the entire machine.
IMPORTANT
You can wash the machine with mild detergent and water. Do not pressure-wash the
machine. Avoid excessive use of water, especially near the control panel, engine,
hydraulic pumps, and motors.
4. Service the air cleaner.
5. Grease the machine.
6. Change the engine oil.
Storage Page 6–1 3462-915 A
To Next Page
Loading...
