Chapter 2
Safety
General Safety
• Read and understand the contents of this Operator’s Manual before starting the engine.
• Do not operate the machine without all guards and other safety protective devices in
place and functioning properly on the machine.
• Park the machine on a level surface, lower the hopper, shut off the engine, and remove
the key (if applicable) before leaving the operating position.
• Keep your hands and feet away from moving parts. If possible, do not make adjustments
with the engine running.
Improperly using or maintaining the machine can result in injury. To reduce the potential for
injury, comply with these safety instructions and always pay attention to the safety-alert
symbol , which means Caution, Warning, or Danger—personal safety instruction. Failure
to comply with the instruction may result in personal injury or death.
Safety and Instructional Decals
Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
Decal Part: 115-4858
decal115-4858
Force from above can cause
crushing of fingers, hands, toes, or feet
—install the cylinder lock.
Decal Part: 116-8775
decal116-8775
Read the Operator’s Manual.
Warning—fill to the bottom of the
filler neck; do not overfill the tank.
3462-915 A Page 2–1 Safety
To Next Page
Loading...
Need help?
General
