Workman GTX Electric Page 5 -- 5 Chassis
Tools for Frame Extension Kit
Use this tool kit (shown in Fig. 4) when installing or ser-
vicing the vehicle frame extension kit.
When the front and rear frame components are separat-
ed to install or service the frame extension kit, the rear
frame of the machine can be supported with the legs in-
cluded in this tool kit. The legs attach to the rear frame
with two (2) flange head screws and nuts for each leg
(Fig. 5).
Toro Part Number: TOR6040
Figure 4
1
2
4
1. Leg (2 used)
2. Screw (4 used)
3. Flange nut (4 used)
4. Bridge assy (not used)
1
3
1. Leg (RH shown)
2. Screw (2 per leg)
3. Flange nut (2 per leg)
Figure 5
1
2
3
Chassis
To Next Page
Loading...
