Workman GTX ElectricPage 5 -- 22Chassis
Rear Brake Caliper Service
1. Brake caliper assembly (LH shown)
2. Caliper slide pin (2 used)
3. Anti--rattle spring (2 used)
4. Brake pad assembly
5. Bleed screw
Figure 18
30 to 35 ft--lb
(41to47N--m)
2
3
1
5
4
108 to 132 in--lb
(12.3 to 14.9 N--m)
NOTE: Replacement parts for the rear caliper assem-
bly are limited to the brake pad assembly and bleed
screw. If any other caliper components are damaged or
worn, replace the caliper assembly.
To Next Page
Loading...
